HP ProLiant ML310e Gen8 v2 User Manual

Component identification 13
• Eight-bay SFF drive model
Hot-plug drive LED definitions
Item LED Status Definition
1
Locate Solid blue The drive is being identified by a host application.
Flashing blue The drive carrier firmware is being updated or requires an update.
2
Activity ring Rotating green Drive activity
Off No drive activity
3
Do not remove Solid white Do not remove the drive. Removing the drive causes one or more of
the logical drives to fail.
Off Removing the drive does not cause a logical drive to fail.
4
Drive status Solid green The drive is a member of one or more logical drives.
Flashing green
The drive is rebuilding or performing a RAID migration, stripe size
migration, capacity expansion, or logical drive extension, or is
erasing.
Flashing
amber/green
The drive is a member of one or more logical drives and the system
predicts the drive will fail.
Flashing amber The drive is not configured and the system predicts the drive will
fail.

HP ProLiant ML310e Gen8 v2 Specifications

General

Product Type	Server
Form Factor	Tower
Processor Sockets	1
Chipset	Intel C222
Memory	Up to 32 GB DDR3
Memory Slots	4 DIMM slots
Storage Controller	HP Dynamic Smart Array B120i
Processor	Intel Xeon E3-1200 v3
Storage	3.5-inch or 2.5-inch drives
Maximum Internal Storage	Up to 16 TB
Network	Gigabit Ethernet
Expansion Slots	1 x PCIe 3.0 x16, 1 PCIe 2.0 x4
Power Supply	300W
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
RAID Support	RAID 0, 1, 5, 10