HP ProLiant ML310e Gen8 v2 User Manual

Component identification 12
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
properly configure the server or data loss could occur.
NMI functionality
An NMI crash dump creates a crash dump log before resetting a system which is not responding.
Crash dump log analysis is an essential part of diagnosing reliability problems, such as failures of operating
systems, device drivers, and applications. Many crashes freeze a system, and the only available action for
administrators is to restart the system. Resetting the system erases any information which could support
problem analysis, but the NMI feature preserves that information by performing a memory dump before a
system reset.
To force the system to invoke the NMI handler and generate a crash dump log, do one of the following:
• Use the iLO Virtual NMI feature.
• Short the NMI header.
For more information, see the HP website
(http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00797875/c00797875.pdf).
Drive numbering
• Four-bay LFF drive model

HP ProLiant ML310e Gen8 v2 Specifications

General

Product Type	Server
Form Factor	Tower
Processor Sockets	1
Chipset	Intel C222
Memory	Up to 32 GB DDR3
Memory Slots	4 DIMM slots
Storage Controller	HP Dynamic Smart Array B120i
Processor	Intel Xeon E3-1200 v3
Storage	3.5-inch or 2.5-inch drives
Maximum Internal Storage	Up to 16 TB
Network	Gigabit Ethernet
Expansion Slots	1 x PCIe 3.0 x16, 1 PCIe 2.0 x4
Power Supply	300W
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
RAID Support	RAID 0, 1, 5, 10