HP ProLiant ML310e Gen8 v2 User Manual

Operations 17
Unlock the tower bezel
The tower bezel must be unlocked and opened to access the drive cage and media bays. It must be unlocked
to remove the access panel. The bezel must remain closed during normal server operations.
Remove the tower bezel
1. Unlock the tower bezel (on page 17).
2. Open the tower bezel.
3. Pull the bezel away from the front chassis.
Install the tower bezel
1. Insert the tabs on the tower bezel to the slots on the front chassis.

HP ProLiant ML310e Gen8 v2 Specifications

General

Product Type	Server
Form Factor	Tower
Processor Sockets	1
Chipset	Intel C222
Memory	Up to 32 GB DDR3
Memory Slots	4 DIMM slots
Storage Controller	HP Dynamic Smart Array B120i
Processor	Intel Xeon E3-1200 v3
Storage	3.5-inch or 2.5-inch drives
Maximum Internal Storage	Up to 16 TB
Network	Gigabit Ethernet
Expansion Slots	1 x PCIe 3.0 x16, 1 PCIe 2.0 x4
Power Supply	300W
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
RAID Support	RAID 0, 1, 5, 10