Processors
Intel Xeon 2.8 GHz-1MB Processor Option Kit
NOTE:
The 2.8 GHz-1MB processor option kit (PN 352567-B21) supports ProLiant ML350 G3
systems with 533 MHz front side bus only. This kit cannot be used in 400 MHz front side bus
systems such as those with 2.4 GHz, 2.2 GHz or 2.0 GHz processors.
352567-B21
Intel Xeon 3.06 GHz-512KB Processor Option Kit
NOTE:
The 3.06 GHz processor option kit (PN 257916-B21) supports ProLiant ML350 G3
systems with 533 MHz front side bus only. This kit cannot be used in 400 MHz front side bus
systems such as those with 2.4 GHz, 2.2 GHz or 2.0 GHz processors.
257916-B21
Intel Xeon 2.8 GHz-512KB Processor Option Kit
NOTE:
The 2.8 GHz processor option kit (PN 314763-B21) supports ProLiant ML350 G3 systems
with 533 MHz front side bus only. This kit cannot be used in 400 MHz front side bus systems
such as those with 2.4 GHz, 2.2 GHz or 2.0 GHz processors.
314763-B21
Intel Xeon 2.4 GHz-512KB Processor Option Kit
NOTE:
This processor option kit supports ProLiant ML350/ML370/DL380 G3 servers with 400
MHz front side bus only. This kit (PN 257913-B21) cannot be used in 533 MHz front side bus
systems such as the 2.8 GHz systems.
257913-B21
Memory
(DIMMs)
NOTE:
The ML350 G3 supports both interleaved and non-interleaved memory configurations. For
best performance automatically invoke interleaving by populating memory in identical pairs. If
1GB of total memory is desired add one 512 MB DIMM to the base configuration. Interleaving and
installation of memory in pairs is not required. Add any combination of memory DIMMs below to
operate in non-interleaved mode.
NOTE:
Each SDRAM Memory kit contains one (1) DIMM.
128 MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 128 MB)
287494-B21
256 MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 256 MB)
287495-B21
512 MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 512 MB)
287496-B21
1024 MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 1024 MB)
287497-B21
2048 MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 2048 MB)
301044-B21
Internal Storage
ML3xx Two Bay Hot Plug SCSI Drive Cage
NOTE:
The drive cage option kit (PN 244059-B21) has one 1” drive bay and one 1.6” drive bay. It
installs in two removable media bays.
244059-B21
Optical Drives
CD-RW/DVD-ROM Combo Drive Option Kit
NOTE:
The DVD-ROM drive is supported in the CD-ROM bay and in the removable media bay. If
placed in the removable media bay, it requires the 2-Device IDE cable (PN 305381-B21).
331346-B21
DVD-ROM Drive Option Kit
217053-B21
QuickSpecs
HP ProLiant ML350 Generation 3 (G3)
Options
DA - 11430 Worldwide — Version 55 — December 13, 2004
Page 13
To Next Page
Loading...
