Connectors, Switches, and LEDs
Table 4-3: System Configuration Switch Settings
Switch Default Position Function Description Settings
1 Off Reserved N/A N/A
2 Off Lock configuration Enables or disables the
ability to write to
NVRAM to reconfigure
the system
Off = Configuration may be
changed.
On = Configuration is locked and
cannot be changed.
3 Off Tower or rack
configuration
Specifies a tower or
rack configuration
Off = Tower configuration
On = Rack configuration
4 Off Enable diskette
boot
Enables or disables
booting from the
diskette drive
Off = Diskette drive boot is
controlled by the configuration.
On = Diskette boot is disabled.
5 Off Password disable Disables password Off = Password is enabled.
On = Password is disabled.
6 Off Clear CMOS and
NVRAM
Clears system
configuration settings
Off = Normal
On = When server is powered up,
all system configuration
information is erased.
7 Off Reserved N/A N/A
8 Off Reserved N/A N/A
Note: Switch positions 7 and 8 are reserved for HP authorized service providers only. Do not change the specified
default setting for these positions, unless instructed otherwise.
Table 4-4: System ID Switch Settings
Position Default Function/Description
1 Off Reserved
2 Off Reserved
3 Off Reserved
4 Off Reserved
HP ProLiant ML350 Generation 3 Server Maintenance and Service Guide 4-5
To Next Page
Loading...
