HP ProOne 600 G3 Disassembly Instructions

Standard Operation Procedure
Tabulator： Issue Department：
Xin-Xin Chen NPSU-PPE
Auditor ：
Ethan Lai
Steps：
Document No. : Pegasus600 DISASS’Y SOP Station :
Operation Name : Ver. : Date :
Note: If finding anything uncommon, notice foreman or assistant at once.
Fixture list (Specification)
Qty.
Fixture list (Specification)
Qty.
Take out Vesa Mount
11(1/1)
2017/5/23
1.00
1. Unscrew (× 4) all joints to take out Vesa
Mount illustrated as Fig. 1 & 2.
 Torsion: 6.0 ± 0.5 kgf.cm
 Take the screwdriver vertically to the screw
holes.
 Put the screws into the material box.
Glove Requirements: Half-finger gloves
Fig. 2
Fig. 1
Electric Screwdriver (S-4000MS) 1
Bits Type: T15,φ=5mm,L=60mm 1
2
1
4
3

HP ProOne 600 G3 Specifications

General

Brand	HP
Model	ProOne 600 G3
Category	Desktop
Language	English