Control panel overview
1 On / Resume button: Turns the power on or off. In certain situations (for example, after clearing a
paper jam), this button resumes printing.
2 Check Paper light: Indicates the need to load paper or remove a paper jam.
3 Check Print Cartridge light: Indicates the need to reinsert the print cartridge, replace the print
cartridge, or close the print-carriage access door.
4
Cancel button: Stops a job, exit a menu, or exit settings.
5 Copies button: Specifies the desired number of copies.
6 Size button: Keeps the image size as it is (100%) or reduce or enlarge it to fit the size of the paper.
7 Paper Type button: Changes the paper type setting to match the type of paper loaded in the paper
tray (plain or photo paper). The default setting is plain paper.
8
Start Copy Black button: Starts a black copy job.
9
Start Copy Color button: Starts a color copy job.
10
Scan button: Starts a scan job.
Status light overview
Several indicator lights inform you of the status of your HP All-in-One. The following
table describes common situations and explains what the lights mean.
For more information about status lights and resolving issues, see Troubleshooting
information.
The lights on the HP All-in-One flash in special sequences to inform you of various
error conditions. Refer to the following table for information on solving your error
condition based on which lights are on or blinking on your HP All-in-One.
Chapter 1
4 HP PSC 1400 All-in-One series
HP All-in-One overview
To Next Page
Loading...
Need help?
General
