HP PSC 950 - Page 36

use the copy features
30
hp psc 900 series
3 Press until the desired enhancement: (Text, Photo, or None)
appears.
4 Press Enter, then press Black or Color.
set the
number of
copies
You can set the number of copies using the front panel.
1 Press Scanner, then press Copy, if not already lit.
2 Press Options until Number of Copies appear.
3 Press until the desired number of copies appear or manually enter
the desired number of copies using the keypad.
4 Press Enter, then press Black or Color.
change
settings for all
copy tasks
Save the copy settings you use most often by setting them as the default.
1 Press Scanner, then press Copy, if not already lit.
2 Change any applicable settings under the Options menu.
3 When done, press Enter.
4 Press until Set New Defaults appears.
5 Press until Yes appears, then press Enter.
Your settings are saved.
perform special copy functions
In addition to making standard copies, your unit supports special functions
such as preparing a T-shirt transfer, making copies fit a page automatically,
printing several copies on a single page, or making a poster. This section
describes the settings to select before pressing the Black or Color buttons.
copy a photo 1 Press Scanner, then press Copy, if not already lit.
2 Press Options repeatedly until Enhancements appears.
3 Press until Photo appears, then press Enter to select your choice.
4 If you are using photo paper, press Options until Paper Type,
appears.
5 Press until the desired photo paper option appears, then press
Enter to select it.
For more information, see Recommended paper-type settings
for copying in the onscreen User’s Guide.
6 To enlarge a photo automatically, press Options until Which Size?
appears.
7 Press until Fit to Page appears, then press Enter to select it.
For more information, see fit a copy to the page on page 31.
8 Press Black or Color.