HP QHD

A Technical specications
This section contains technical specications for the physical aspects of your monitor, such as the weight and
viewing dimensions, as well as required environmental operating conditions and power source ranges.
All specications represent the typical specications provided by HP component manufacturers; actual
performance can vary either higher or lower.
NOTE: For the latest specications or additional specications for this product, go to http://www.hp.com/
go/quickspecs/ and search for your specic monitor model to nd the model-specic QuickSpecs.
68.6 cm (27.0 in) QHD model specications
This section provides specications for your monitor.
Table A-1 68.6 cm (27.0 in) QHD monitor specications
Specication Measurement
Display, wide-screen 68.6 cm 27.0 in
Type IPS
Viewable image size 68.6 cm diagonal 27.0 in diagonal
Maximum weight (unpacked) 7.6 kg 16.7 lb
Dimensions (include base)
Height (highest position) 53.52 cm 21.07 in
Height (lowest position) 38.52 cm 15.17 in
Depth 21.60 cm 8.50 in
Width 61.33 cm 24.15 in
Height adjustment range 15.00 cm 5.9 in
Tilt adjustment range –5° to 23°
Swivel adjustment range ±45°
Pivot adjustment range ±90°
Environmental requirements temperature
Operating temperature –5°C to 35°C 41°F to 95°F
Storage temperature –20°C to 60°C –4°F to 140°F
Storage humidity 5% to 95% (noncondensing)
Operating humidity 20% to 80% (noncondensing)
Power source 100 V ac to 240 V ac 50/60 Hz
Input terminal One HDMI port, one DisplayPort connector, and one USB Type-C DisplayPort
connector
28 Appendix A Technical specications