● In-plane switching (IPS) panel
● Nonglare panel with an LED backlight
● Wide viewing angle to allow viewing from a sitting or standing position, or moving from side to side
● Tilt, swivel, and height adjustment capabilities
● Pivot capability to rotate the monitor head from landscape to portrait orientation
● Removable stand for exible monitor head mounting solutions
● HP Quick Release 2 device to quickly attach the monitor head to the stand with a simple click, and then
remove it with the convenient sliding tab release
● DisplayPort™ video input (cable included)
● High-Denition Multimedia Interface™ (HDMI) video input (cable included)
● USB hub with one USB Type-C® port (cable included) that connects to the computer (upstream) and four
USB ports that connect to USB devices (downstream)
● Four on-screen display (OSD) buttons, three that you can recongure to quickly allow selection of the
most commonly used operations
● Plug and Play capability if supported by your operating system
● VESA® mounting bracket for attaching the monitor head to a wall-mount device or swing arm
● Security cable slot on the rear of the monitor for an optional security cable
● Cable management feature for placement of cables and cords
● On-screen adjustments in several languages for easy setup and screen optimization
● Energy saver feature to meet requirements for reduced power consumption
NOTE: For safety and regulatory information, see the Product Notices provided in your documentation kit.
To access the latest user guide, go to http://www.hp.com/support, and follow the instructions to nd your
product. Then select Manuals.
Front components
To identify the components on the front of the monitor, use this illustration and table.
Getting to know your monitor 3
To Next Page
Loading...
