I/O PORTS - CONNECTIVITY
6 USB 2.0
2 USB+PWR 12V (1 available if HP RP7 2-line (2x20) VFD Customer Display is installed)
1 USB+PWR 24V (Printer)
1 USB in lockable compartment (Security screw provided and housed in I/O cover. Requires a T-15 tamper-resistant torx
security screwdriver)
1 RJ-12 Cash Drawer (supports dual drawers via optional splitter cable)
2 RS-232 Powered configurable (+5V/+12V, F-10 Setup Configurable)
1 Parallel
1 PS/2 (supports keyboard or mouse, both through a splitter)
1 DVI-I for Secondary Display (not available if HP RP7 10.4-inch CFD is installed)
1 RJ-45 10/100/1000 LAN
1 Audio line-in
1 Audio line-out (not available if HP RP7 10.4-inch CFD (Customer Facing Display)is installed and audio is connected)
1 DC-in (for power supply)
1 DC-out (for HP RP7 10.4-inch CFD only)
4 connectors for select HP integrated peripherals
HP RP7 Retail System, Model 7800
I/O PANEL
1.
1 Audio line-in
8.
1 USB+PWR 24V
2.
1 DVI-I for Secondary Display (not available if HP RP7 10.4-
inch CFD is installed)
9.
1 USB in lockable compartment (Security screw provided and
housed in I/O cover. Requires a T-15 tamper-resistant torx
security screwdriver.)
3.
1 PS/2 (supports keyboard or mouse, both through a splitter)
10.
1 RJ-12 Cash Drawer (supports dual drawers via optional
splitter cable)
4.
1 DC-out (for HP RP7 10.4-inch CFD only)
11.
2 USB+PWR 12V (1 available if HP RP7 VFD Customer Display
is installed)
5.
6 USB 2.0
12.
1 RJ-45 10/100/1000 LAN
6.
2 RS-232 Powered (+5V/+12V, F-10 Setup Configurable)
13.
1 Parallel
7.
1 DC-in (for power supply)
14.
1 Audio line-out (not available if HP RP7 10.4-inch CFD is
installed and audio is connected)
QuickSpecs
HP RP7 Retail System, Model 7800
Standard and Configurable Components
DA - 14350 North America — Version 15 — February 10, 2014
Page 14
To Next Page
Loading...
