HP s300 - Getting Started; Inserting the Battery

4 5
Charging the Battery by USB
The battery that comes alone with your package is not fully charged. You need to charge the battery
before using the camera.
Connect the camera with the USB cable as shown.1.
Connect the other end with the USB adapter and plug it 2.
into a power outlet or with the USB port of PC directly
for charging.
When the battery is charging, the LED indicator lights up.•
When the battery is fully charged, the LED indicator turns •
off.
When the battery is incorrectly charged, the LED indicator •
ashesrapidly.
When the camera is connected without the battery, the LED •
indicator will not Light up.
1
2
The battery charging time is approximately 2 hours.
It’s not recommended to operate the camera when charging.