10 11
3. Taking Photos
This camera is designed to make the experience of taking photos simple and quick. It’s Auto mode feature
will optimise the internal settings so that in most situations, it can take photos with ease. This camera also
has additional modes and features that extend the capabilities for the more experienced user.
Power on the camera by pressing the Power button 1.
.
Slide the Mode switch to Photo mode [ 2. ].
Frame the shot using the focus bracket on the LCD monitor.3.
Lightly pressing the 4. Shutter button down to the halfway position will start the automatic
focus and adjustments to the exposure level. When the camera has successfully completed this
automatic routine, the focus bracket will turn green. If the automatic focus and exposure routine
is not successful, the bracket will turn red. If this occurs, simply release the shutter and repeat this
step until the bracket turns green. In some situations, lighting and contrast may be insufficient for
the camera to successfully complete the auto focus and exposure level routine. If this occurs, try
better lighting.
Pressing the 5. Shutter button
down fully will take the photo. If you take the photo when the
bracket is red, the focus and exposure may not be correct.
If the shake warning icon
appears, hold the camera steadily, with your arms at your side or use a
tripod to stabilize the camera to reduce the risk of blurred photos.
To Next Page
Loading...
