Back to TOC Using accessories 67
Scanning from the XPA
You can scan slides or negatives using the XPA. You should NOT use
the XPA to scan full-size (A4 or Letter) presentation slides and
transparencies. To scan these full-size items, place them on the
scanner glass, place a white piece of paper on top, and scan as you
normally would using the Scanner Glass command on the Scan
menu.
Scanning slides
To scan standard 35 mm slides, you need the larger template and the
smaller, slide template.
To scan slides
1 With the XPA connected to its port on the scanner, restart the
software.
2 Place the large template on the scanner glass so the wording
“Hewlett Packard” is at the top, or closest to the hinged portion of
the lid.
“Hewlett Packard”
here
To Next Page
Loading...