68 Using accessories Back to TOC
3 Place the slide template in the cutout of the large template.
4 Place up to four slides, one in each slot, in the template.
5 If you are not using all of the slots in the template, cover the empty
slots with the knock outs from the template to ensure best image
quality.
6 Place the XPA over the large template. Align the XPA to fit in the
corner cutouts on the template.
7 On the Scan menu, click XPA (Slides).
8 Before making any changes, see "Making optional adjustments for
transparent items" on page 72.
9 When finished using the XPA, on the Scan menu, click Scanner
Glass. Disconnect the XPA if you want.
To Next Page
Loading...