Back to TOC Using accessories 69
Scanning negatives
To scan negatives, you need the larger template and the negative
template.
To scan negatives
1 With the XPA connected to its port on the scanner, restart the
software.
2 Place the large template on the scanner glass so the wording
“Hewlett Packard” is at the top, or closest to the hinged portion of
the lid.
3 Slide the strip of negatives into the negative template. Place the
negative with the curve on top.
CAUTION Negatives are easily damaged. Touch them only by
the edges.
4 Cover any slots you are not using with the knock outs from the
template to ensure best image quality.
“Hewlett Packard”
here
To Next Page
Loading...