Back to TOC Troubleshooting usage and maintaining 93
Clearing jams from the ADF
Pages can jam at the beginning or the end of a page. Use the
appropriate procedure below to clear the jam and continue.
To clear jams at the start of a page
1 While holding down on the document input tray, raise the hatch.
2 Remove the jammed paper.
3 Remove the item from the ADF.
4 Close the hatch. Press down firmly on both sides until you hear a
click.
5 Restack all pages and reload them into the ADF.
6 On the ADF prompt on the computer, reselect any settings you had
changed and click Scan To or Scan again.
To Next Page
Loading...