94 Troubleshooting usage and maintaining Back to TOC
To clear jams at the end of a page
1 While holding down on the document input tray, open the hatch.
2 Remove any pages from the input tray.
3 While holding the document output tray down, open the document
input tray.
4 Remove the jammed paper.
5 Close the input tray and then close the hatch. Press down firmly on
both sides until you hear a click.
6 Restack all pages and reload them into the ADF.
7 On the ADF prompt on the computer, reselect any settings you had
changed and click Scan To or Scan again.
To Next Page
Loading...