CommentsDCFMWebTools 6.1.0Function
Monitor > Reports > Fabric
Summary report
Reports > Fabric summaryFabric summary
Viewing FCIP tun-
nels is still suppor-
ted in WebTools
6.1.1, but New,
Edit Config, and
Delete are avail-
able only in
DCFM.
Configure > FCIP tunnelPort Admin Module >
GigE tab
FCIP tunnel configuration
Configure > FCIP tunnelPort Admin Module >
GigE tab
GigE ports interface
Configure > FCIP tunnelPort Admin Module >
GigE tab
GigE ports route
In WebTools,
non-local switch
port id/WWN
can be added us-
ing text box.
Configure > ZoningZone Admin
Admin Domain
Switch Admin > DCC
policies
Performance Monitoring
Non-local switch ports
display in zoning tree
Configure > Zoning
Replace/Replace All zone
members by selecting the offline
devices from the zone tree.
Offline devices have an unknown
overlay badge with good
visibility.
Zone AdminRemove Offline or inac-
cessible Devices
Configure > Zoning
Zoning report for both online and
offline database
Zone AdminZone database summary
ping
Zoning
Fabric OS 6.1.1 fixes
Table 9 lists defects closed in the Fabric OS 6.1.1 firmware release.
Table 9 Fabric OS 6.1.1 closed defects
SolutionClosed defect summary
Fixed in Fabric OS 6.1.1.During storage failover/failback test, traffic stops and fails to recover
in single and dual backbone configurations.
Fixed in Fabric OS 6.1.1.A failure was detected in the MP Router blade (FR4ā18i) due to a dead
heartbeat.
Fixed in Fabric OS 6.1.1.Link drops when FLOGI is received before the port comes online on
an FL_Port.
22