Figure 11 Paired locations in a c3000 enclosure with a full-height partner server blade
.
2. Use the Shutdown command on the partner server blade to power down the partner server blade.
If not already installed, install a HP PCI Express Mezzanine Pass-Thru Card in mezzanine 3
connector in the server blade. See the documentation that ships with the mezzanine card and
the server blade documentation for more information.
3. Remove the blank from the device bay. Squeeze in the release tabs (1) and pull the blank away
from the assembly (2).
Figure 12 Removing the blank
.
Installing an HP StorageWorks Tape Blade30
To Next Page
Loading...
