HP StoreEver MSL2024 Quickspecs

LED Indicators
(on front panel)
Ready LED (Green): shows ready status information
Clean LED (Amber): shows fault status information
Attention LED (Amber): shows fault status information
Error LED (Amber): shows fault status information
Management Interface 10/100 Mbytes/second, auto-configuring interface. RJ-45 connection.
Https configurable.
Power MSL2024: 168 Watts (max)
MSL4048/MSL8048/MSL8096: 312 Watts (max)
Input Requirements 100 to 240 VAC, 50 to 60 Hz, 2.5 Amperes
Relative Humidity
(non-condensing)
Operating 20% to 80%
Shipping 20% to 90%
Temperature Range
(wet bulb)
Operating 50° to 95° F (10° to 35° C)
Shipping -22° to 140° F (-30° to 60° C)
NOTE: Library operating temperature limits are based on the industry standard tape limit.
Altitude Operating 15,000 ft (3048 m)
Shipping 35,000 ft (10,675 m)
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For tape drives and media, 1 GB = 1 billion bytes. Actual formatted capacity is less.
QuickSpecs
HP StoreEver MSL2024/MSL4048/MSL8048/MSL8096
Tape Libraries
Technical Specifications
DA - 13258 Worldwide — Version 36 — January 18, 2013 Page 30

HP StoreEver MSL2024 Specifications

General

Dimensions (WxDxH)	87 x 480 x 806 mm
Media type	Tape Cartridge
Form factor	2U
Product type	Storage auto loader & library
Standard interfaces	Serial Attached SCSI (SAS)
Number of slots (max)	24
Storage media types supported	LTO-7