39
2. Open the HPSAM client window and initiate a connection to the blade PC or Active Directory Server.
3. Make sure a smart card is installed in the reader. The system requests the smart card PIN.
4. Type the PIN that you assigned. The user is logged into the blade PC or Active Directory Server.
Usage case 4: Accessing secure Web site
The following steps provide instructions for accessing a secure Web site using an Gemalto smart card
through a blade PC or Active Directory Server. Installing and configuring a secure Web site is beyond the
scope of this white paper; therefore, the white paper assumes the secure Web site is already functional
and accessible from the blade PC or Active Directory Server. The white paper also assumes that you can
use the certificate installed on the smart card to access this secure Web site.
1. Log in to a blade PC or Active Directory Server using a smart card, as demonstrated in usage case 1.
2. Use Internet Explorer to connect to a Web site to make sure the system is functioning properly. Con-
nect to a Web page on the same server as the secure Web site.
3. Confirm that the lower right corner of the Internet Explorer window does not display a lock icon.
To Next Page
Loading...
Need help?
General