HP Thunderbolt 3 User Manual

HP Thunderbolt 3 PCIe Card
Installation
Introduction
This installation guide explains how to install the Thunderbolt™ 3 PCIe card into an HP workstation.
Kit contents
NOTE: Kit contents might vary depending on your computer model.
• HP Thunderbolt 3 PCIe card
• General-Purpose Input/Output (GPIO) cable
• DisplayPort cables (2)
• Installation instructions (this document)
• Warranty information
Before you begin
IMPORTANT: For optimal Thunderbolt 3 performance, install a PCI Express graphics card.
To view QuickSpecs and determine the compatibility of this product with your HP computer, see
http://www.hp.com/go/productbulletin.

HP Thunderbolt 3 Specifications

General

Brand	HP
Model	Thunderbolt 3
Category	PCI Card
Language	English

Summary

Introduction

Kit Contents

Lists the items included in the Thunderbolt 3 PCIe card kit.

Before You Begin

Provides prerequisites and important notes before installation.

Warnings and Cautions

General Safety Precautions

Covers hot surfaces, electrical shock, static discharge, and lifting safety.

Installation Process

Step 1: Accessing Internal Components

Details preparing the computer, including BIOS update and power down.

Step 2: Installing the Thunderbolt 3 PCIe Card

Covers physical installation, slot selection, and cable connections.

Step 3: Reassembling the Computer

Instructions for closing the computer and reconnecting peripherals.

Step 4: Loading the Thunderbolt 3 PCIe Card Driver

Guide to downloading and installing the necessary software driver.