HP TouchSmart 9300 User Manual

Replacing the computer stand
Replace the computer stand on your HP TouchSmart PC. Once the computer stand is on the computer,
replace the VESA adapter plate on the bottom of the computer stand. This stabilizes the computer stand
so that it supports the weight of your HP TouchSmart PC.
1. Use a Phillips screwdriver to remove the four screws from the VESA adapter plate at the back of
the HP TouchSmart PC. Save the screws.
2. If the stand cover is on computer stand, remove it before proceeding.
12 Chapter 2 Reinstalling the stand on your HP TouchSmart PC Wall-Mounting your HP TouchSmart

HP TouchSmart 9300 Specifications

General

Resolution	1920 x 1080
Audio	Integrated High Definition Audio
Storage	1TB HDD
Display	23-inch
Operating System	Windows 7
Networking	10/100/1000 Gigabit Ethernet
Wireless	802.11b/g/n
Ports	USB 2.0, Headphone, Microphone, Ethernet