Hard drive specifications
160-GB* 120-GB* 80-GB*
Dimensions
Height
9.5 mm 9.5 mm 9.5 mm
Width 70 mm 70 mm 70 mm
Weight 102 g 102 g 102 g
Interface type
SATA SATA SATA
Transfer rate
Synchronous (maximum)
100 MB/sec 100 MB/sec 100 MB/sec
Security ATA security ATA security ATA security
Seek times (typical read, including setting)
Single track
3 ms 3 ms 3 ms
Average 13 ms 13 ms 13 ms
Maximum 24 ms 24 ms 24 ms
Logical blocks
312,581,808 237,937,274 158,624,849
Disk rotational speed
5400 rpm
Operating temperature
5°C to 55°C (41°F to 131°F)
NOTE: Certain restrictions and exclusions apply. Consult technical support for details.
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Accessible capacity is less. Actual drive specifications
may differ slightly.
90 Chapter 6 Specifications
To Next Page
Loading...
Need help?
General