EasyManua.ls Logo

HP Vectra VEi8 - System Overview

HP Vectra VEi8
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 23
3 Replacing Hardware Components
Removing and Replacing the Cover and Front Panel
Removing and Replacing the Cover and Front Panel
Removing the Cover
Before removing the cover, switch off the monitor and PC, disconnect
all power cords and any telecommunication cables. If necessary, unlock
the cover at the rear of the PC.
1
Undo the three thumb screws at the back of the PC and remove the
cover by sliding it towards you by about 2 cm (0.8 inches) and then
lifting it off.
2
If required, remove the front panel. To remove the panel, lift the two
retaining catches, then tilt the panel forwards and lift it off.

Other manuals for HP Vectra VEi8

Related product manuals