4–8 User Guide
Operating the Monitor
Adjusting Screen Quality
Allow the monitor to warm up for 20 minutes before performing
the following procedures.
The Auto-adjustment feature automatically fine-tunes the image
quality each time a new video mode is displayed. If additional
image quality improvement is desired, run the Auto-Adjust
software on the CD and press the – (Minus) button on the monitor
front panel to manually activate the Auto-Adjustment function.
Mode Display On / Off Selection N
Power-On Status
Display
On / Off Selection N
Sleep Timer Timer Set Menu N
Serial Number Displays monitor
serial number
Basic Menu
Cancel
Save and Return
OSD Control Horizontal Position Adjustment Scale N
Vertical Position Adjustment Scale N
OSD Timeout Adjustment Scale N
Cancel
Save and Return
Information
Factory Reset Yes
No
Exit
Advanced OSD Menu Levels (Continued)
Level 1 Level 2 Level 3 Factory
Preset
To Next Page
Loading...
