Table 31 P9500 environmental specifications (continued)
In StorageNot OperatingOperatingItem
At the resonant frequency with
the highest displacement found
between 3 to 100 Hz
3
70 to 99 Hz: 0.05 mm
99 to 300 Hz: 9.8 m/s
1
Random Vibration:
0.147 m2/s3
30 min, 5 to 100 Hz
4
--Up to 2.5
7
Earthquake
resistance (m/s2)
Horizontal:78.4 m/s
1
, 15 ms-Shock
Incline Impact 1.22 m/s
5
Vertical:
Rotational Edge 0.15 m
6
--60 m to 3,000 mAltitude
Notes:
1. Recommended temperature range is 21 to 24°C
2. On shipping/storage condition, the product should be packed with factory packing
3. The above specifications of vibration are applied to all three axes
4. See ASTM D999-01 The Methods for Vibration Testing of Shipping Containers.
5. See ASTM D5277-92 Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester.
6. See ASTM D6055-96 Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and
Crates.
7. Time is 5 seconds or less in case of the testing with device resonance point (6 to 7Hz).
8. When flash modules are installed in the system.
84 Specifications
To Next Page
Loading...
