Security Features
Padlock support
Padlock loop in rear of chassis. Locks side cover and secures chassis from theft. (0.22" diameter)
Cable Lock Support
Kensington lock slot in rear of chassis. Locks side cover and secures chassis from theft. (3mm x
7mm opening)
Universal chassis clamp
lock support
Threaded feature in rear of chassis. Locks side cover and locks cables to chassis. Secures
chassis from theft and allows multiple units to be chained together when used with optional cable.
Solenoid lock and hood
sensor
Yes
Rear Port Control Cover
(optional)
Locks rear IO cables to prevent cable theft.
Serial, Parallel, USB
Enable/Disable
Enable or disable serial, parallel or USB ports and hide them form the operating system
Removable Media Write/
Boot Control
Prevents the computer from being booted from removable media on supported devices (and can
disable writes to media)
Power-On Password
Prevents an unauthorized person from booting up the computer
Setup Password
Prevents an unauthorized person from changing the system configuration
Other Features
ACPI-Ready Hardware
Advanced Configuration and Power Management Interface (ACPI).
Allows the system to wake from a low power mode.
Controls system power consumption, making it possible to place individual cards and
peripherals in a low-power or powered-off state without affecting other elements of the
system
Insight Diagnostics
HP Insight Diagnostics Offline Edition
The diagnostics utility enables you to perform testing and to view critical computer hardware and
software configuration information from various sources. This utility enables you to:
Run diagnostics
View the hardware configuration of the system
Key features and benefits
HP Insight Diagnostics simplifies the process of effectively identifying, diagnosing, and isolating
the hardware issues. In addition to robust management tools, service tools can be invaluable in
quickly resolving system problems. To streamline the service process and resolve problems
quickly, it is necessary to have the right information available at the time that a service call is
placed. The primary information requirement, which is also the one that provides the greatest
insight into potential system issues, is the configuration of the system. Insight Diagnostics helps
provide higher system availability. Typical uses of the Insight Diagnostics are:
Testing and diagnosing apparent hardware failures
Documenting system configurations for upgrade planning, standardization, inventory
tracking, disaster recovery, and maintenance
Sending configuration information to another location for more in-depth analysis
QuickSpecs
HP xw4600 Workstation
Technical Specifications
DA - 12792 Worldwide QuickSpecs — Version 19 — 9.12.2008
Page 21