Energy
Consumption
(in accordance
with US Energy
Star test
method)
AC Input
Voltage
at 100
VAC +/- 5 VAC,
50 Hz +/- 3 Hz
AC Input
Voltage
at 115
VAC +/- 5 VAC,
60 Hz +/- 3 Hz
AC Input
Voltage
at 230
VAC +/- 5 VAC,
50 Hz +/- 3 Hz
Normal
Operation
102.8 watts 101.7 watts
100.4watts
Sleep
1
2 watts 2 watts 2 watts
Off
0.05 watts 0.06 watts 0.25 watts
Heat
Dissipation
2
AC Input
Voltage at 100
VAC +/- 5 VAC,
50 Hz +/- 3 Hz
AC Input
Voltage at 115
VAC +/- 5 VAC,
60 Hz +/- 3 Hz
AC Input
Voltage at 230
VAC +/- 5 VAC,
50 Hz +/- 3 Hz
Normal
Operation
350.8 BTU/hr 347.0 BTU/hr 342.6 BTU/hr
Sleep
6.8 BTU/hr 6.8 BTU/hr 6.8 BTU/hr
Off
0.2 BTU/hr 0.2 BTU/hr 0.9 BTU/hr
NOTES
1
This sleep status ignore the input sync signal check cycle when
metering the model in sleep mode.
2
Heat dissipation is calculated based on the measured watts, assuming
the service level is attained for one hour.
Longevity and
Upgrading
Upgradeability features contained in the product
include:
One upstream and four downstream USB ports
Ergonomics
The monitor meets the ergonomic requirement
of EN-ISO 13406-2 for flat panel displays.
Additional Information
This product is in compliance with the
Restrictions of Hazardous Substances (RoHS)
Directive, 2002/95/EC.
This HP product is designed to comply with the
Waste Electrical and Electronic Equipment
(WEEE) Directive, 2002/96/EC.
This product is in compliance with California
Proposition 65 (State of California; Safe
Drinking Water and Toxic Enforcement Act of
1986).
This product is in compliance with the IEEE
1680 (EPEAT) standard at the SILVER level,
see www.epeat.net.
Plastics parts weighing over 25 grams used in
the product are marked per ISO 11469 and
ISO1043.
Display meets the requirement for low
frequency electromagnetic fields per MPR-II,
TCO, and prEN50279 A/B/C.
This product contains 0% recycled materials (by
wt.)
This product is 97.6% recycleable when
QuickSpecs
HP xw4600 Workstation
Technical Specifications - Monitors
DA - 12792 Worldwide QuickSpecs — Version 19 — 9.12.2008
Page 65