Configuring system BIOS
Configure the system BIOS to enable embedded SATA RAID functionality.
1. Press F10 to enter the system BIOS setup.
2. Use the arrow keys to highlight the desired language, then press Enter.
3. Press left arrow, right arrow, left arrow, and right arrow to highlight Storage>Storage Options,
then press Enter.
4. Press the up or down arrow key to highlight SATA Emulation.
5. Press the left or right arrow key to select RAID/AHCI.
6. Press F10 to accept the new setting.
7. Press left arrow, right arrow, left arrow, and right arrow to highlight Advanced > Power-On
Options, then press Enter.
8. Press the up or down arrow key to highlight POST Messages.
9. Press the left or right arrow key to select Enable.
10. Press F10 to accept the new setting.
11. Use the arrow keys to highlight Advanced>Device Options, and press Enter.
12. Press the up or down arrow key to highlight SATA RAID Option ROM Download, and press
Enter.
13. Press the left or right arrow key to select Enable.
14. Press F10 to accept the new setting.
15. Press left arrow, right arrow, left arrow, and right arrow to highlight File>Save Changes and
Exit, and press Enter.
16. Press F10 when prompted.
ENWW Configuring system BIOS 143
To Next Page
Loading...
