Heading Option Description
PXH-V Secondary Latency Timer
Sets the secondary latency timer on the PXH-V bridge which is connected to PCI-X slot 5.
PCIX Secondary Latency Timer
Sets the secondary latency timer on the ESB2 PCI-X bridge which is connected to PCI-X slots 6
and 7, and the SAS controller.
SAS Latency Timer
Sets the latency timer on the SAS controller.
Peer-to-Peer Reads
Enables you to allow peer-to-peer memory reads between the PCI-X buses behind the PXH-V.
Fast Delayed Transaction Timer
Enables you to set Discard Transaction Timer to “short delay.” This may improve performance
issues with certain PCI devices. Do not enable this setting unless instructed to do so by the PCI
device supplier.
Slot Options Applies to these slot types:
●
Slot 1 — PCI
●
Slot 2 — PCI Express x16
●
Slot 3 — PCI Express x8 (x4)
●
Slot 4 — PCI Express x16 (x4)
●
Slot 5 — PCI-X 133
●
Slot 6 — PCI-X 100
●
Slot 7 — PCI-X 100
For PCI Express slots, the available option is Option ROM Download.
For PCI-X slots, the available options are Speed, Option ROM Download, and Latency Timer.
For PCI slots, the available options are Option ROM Download and Latency Timer.
* Available on select models.
** These options should be used by advanced users only.
Table 3-1 Computer Setup (F10) Utility menu descriptions (continued)
ENWW Computer Setup (F10) Utility 33
To Next Page
Loading...
