HP Z210 Series Rack Mounting Instructions

3. To install the workstation on the tray:
a. Guide the front bezel of the workstation under the lip of the adapter bracket (1).
b. Rotate the back of the workstation down onto the tray (2).
c. Tighten the single, black rear captive screw (3), to secure the rear of the workstation into the
tray.
Figure 4 Installing the workstation on the tray
Step 4—Loading the workstation-tray assembly into
the rack
To load the assembly into the rack:
1. Place the rear of the workstation-tray assembly on the rail-bracket shelf (1).
ENWW
Step 4—Loading the workstation-tray assembly into the rack
5

HP Z210 Series Specifications

General

Chipset	Intel C206 Chipset
Networking	Integrated Intel 82579LM Gigabit Ethernet
Processor Options	Intel Xeon E3-1200 series, Intel Core i3, i5, i7 processors
Memory	Up to 32 GB DDR3
Storage Options	SATA HDD or SSD
Graphics Options	Integrated Intel HD Graphics, NVIDIA Quadro, AMD FirePro
Operating System	Red Hat Enterprise Linux
Form Factor	Convertible Mini-Tower
Optical Drive	DVD-ROM, DVD+/-RW
Audio	Integrated HD audio
Expansion Slots	PCIe x16, PCIe x1, PCI
Ports	USB 2.0, USB 3.0, serial, parallel, PS/2
Power Supply	400W 90% efficient