Processors
Factory
Configured
Option
Kit
Option
Kit Part
Number
Support
Notes
Four-Core and Six-Core Intel Xeon Processor 5600 Series with Intel® 64 Architecture
Intel® Xeon® Processor X5675 6C 3.06 GHz, 95W, 12M cache,
6.40GT/s QPI, DDR3 1333MHz, HT, Turbo
Y Y
LB215AA
Intel® Xeon® Processor X5672 4C 3.20 GHz, 95W, 12M cache,
6.40GT/s QPI, DDR3 1333MHz, HT, Turbo
Y Y
LB214AA
Intel® Xeon® Processor X5660 6C 2.80 GHz, 95W, 12M cache,
6.40GT/s QPI, DDR3 1333MHz, HT, Turbo
Y Y
WG732AA
Intel® Xeon® Processor X5650 6C 2.66 GHz, 95W, 12M cache,
6.40GT/s QPI, DDR3 1333MHz, HT, Turbo
Y Y
WG731AA
Intel® Xeon® Processor E5649 6C 2.53 GHz, 80W, 12M cache,
5.86GT/s QPI, DDR3 1333MHz, HT, Turbo
Y Y
LB212AA
Intel® Xeon® Processor X5647 4C 2.93 GHz, 130W, 12M
cache, 5.86GT/s QPI, DDR3 1066MHz, HT, Turbo
Y Y
LB213AA
Intel® Xeon® Processor E5645 6C 2.40 GHz, 80W, 12M cache,
5.86GT/s QPI, DDR3 1333MHz, HT, Turbo
Y Y
LB211AA
Intel® Xeon® Processor E5640 4C 2.66 GHz, 80W, 12M cache,
5.86GT/s QPI, DDR3 1066MHz, HT, Turbo
Y Y
WG730AA
Intel® Xeon® Processor E5620 4C 2.40 GHz, 80W, 12M cache,
5.86GT/s QPI, DDR3 1066MHz, HT, Turbo
Y Y
WG728AA
Intel® Xeon® Processor E5607 4C 2.26 GHz, 80W, 8M cache,
4.80 GT/s QPI, DDR3 1066MHz
Y Y
LB210AA
Intel® Xeon® Processor E5606 4C 2.13 GHz, 80W, 8M cache,
4.80 GT/s QPI, DDR3 1066MHz
Y Y
LB209AA
NOTE 1:
When ordering two processors, the second processor must be the same as the first. Intel
processor numbers are not a measurement of higher performance. Processor numbers differentiate
features within each processor family, not across different processor families. See:
http://www.intel.com/products/processor_number/
for details.
Quad-Core technologies are designed to improve performance of multithreaded software products and
hardware-aware multitasking operating systems and may require appropriate operating system software
for full benefits; check with software provider to determine suitability; Not all customers or software
applications will necessarily benefit from use of these technologies.
64-bit computing on Intel® 64 architecture requires a computer system with a processor, chipset, BIOS,
operating system, device drivers, and applications enabled for Intel® 64 architecture. Processor will not
operate (including 32-bit operation) without an Intel® 64 architecture-enabled BIOS. Performance will vary
depending on your hardware and software configurations. See:
http://www.intel.com/info/em64t
for
more information.
Intel's numbering is not a measurement of higher performance.
Support for Xeon 5600 Series processors requires the C2 revision of the Intel 5520 chipset. Two methods
are available to determine if a specific Z600 system has the C2 revision of the chipset. 1. Use the BIOS
setup menu to access the "Boot Block Date" from the "System Information Menu". All B3-based systems
will have a "1/30/09" date and C2-based systems will have a "01/07/10" date. 2. HP Performance Advisor
SW can be used to determine the PCA ID, which is reported by Performance Advisor under "System
Configuration" and "Baseboard ID". All B3-based systems will have the ID "0AE8h" and all C2-based
QuickSpecs
HP Z600 Workstation
Supported Components
DA - 13277 North America — Version 51 — November 21, 2013
Page 6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
