8. If it is necessary to replace the webcam/microphone module or the microphone module:
a. Release the tape that secures the webcam/microphone module cable to the webcam/
microphone module (1).
b. Disconnect the cable (2) from the module.
CAUTION: Handle the module with caution. The module has a thin profile and is susceptible to
damage when not handled carefully.
c. Remove the webcam/microphone module (3) from the display enclosure. (The webcam/
microphone module is attached to the display enclosure with double-sided tape.)
The webcam/microphone module is available using spare part number 784457-001. The
microphone module is available using spare part number 730795-001.
ENWW Component replacement procedures 73
To Next Page
Loading...
