HPE 2530 User Manual

HPE 2530 24-Port and 48-Port Switches
Quick Setup Guide
The switch drawings in this document are for illustration only and may not match your particular switch
model.
For more detailed instructions and information to set up your switch, view or download the Installation
and Getting Started Guide for your switch at http://www.hpe.com/networking/support.
1. Unpack and check included parts.
• Documentation kit
• Switch
• Console port serial cable (DB-9 to RJ-45)
• Accessory kit (installation hardware)
• AC power cord
2. Prepare for installation. To avoid personal injury or product damage, review “Safety and Regulatory
Information for HPE 2530 24/48-Port Switches” (page 4).
3. Power on and verify that Self-Test completes normally. The switch does not contain a power switch. It is powered on
by connecting power cord through the AC power cord
*5900-4853*
© Copyright 2013, 2015 Hewlett Packard Enterprise Development LP
The information in this document is subject to change without notice.
Part Number: 5900-4853
Published: November 2015

HPE 2530 Specifications

General

Brand	HPE
Model	2530
Category	Network Router
Language	English

Summary

Unpack and Check Included Parts

Prepare for Installation

Power On and Verify Self-Test

Install Switch Hardware

Rack Mounting

Mount the switch in a rack using accessory kit brackets and M4/12-24 screws.

Table or Desktop Mounting

Attach self-adhesive pads to the switch bottom and place on a secure horizontal surface.

Wall or Under-Table Mounting

Attach brackets to the switch for wall/under-table mounting; ensure correct port orientation.

Connect Network Cables

Optional Switch Configuration

Safety and Regulatory Information

Installation Precautions

Guidance on securing racks, mounting devices, and wall-mounting the switch correctly.

SFP Installation Notes

Product Specifications

Electrical Specifications

Details AC voltage, maximum current, and frequency range for switch models.

Acoustics

Provides noise emission levels (dB) for different switch models according to DIN standards.

Environmental and Safety Details

Environmental Specifications

Outlines operating temperature, humidity, and altitude limits for the switches.

Safety Standards

Lists compliance standards for lasers and general product safety.

Power Cord Information

Regulatory Information and Feedback

Documentation Feedback

Instructions on how to provide feedback to improve product documentation.