Need help?Do you have a question about the HPE SN2410M and is the answer not in the manual?
General| Switching Capacity | 2.56 Tbps |
|---|---|
| Category | Switch |
| Form Factor | Rack-mountable |
| Ports | 48 x 25 Gigabit Ethernet + 8 x 100 Gigabit Ethernet QSFP28 |
| MAC Address Table Size | 288000 entries |
| Jumbo Frame Support | Yes |
| Power Supply | 2 |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
Details the throughput and interface speed capabilities of the switch models.
Outlines critical safety precautions to be followed before and during installation.
Covers mechanical, power, and thermal precautions for rack mounting.
Describes various methods for mounting the system into a 19-inch rack.
Provides instructions and parts for installing the static rail kit for SN2700M.
Details the installation of the telescopic rail kit for SN2700M.
Instructions for installing the static rail kit for SN2410M/SN2410bM.
Step-by-step guide for powering on the system and initial status checks.
Procedures for configuring network settings via MLNX-OS.
Procedures for extracting and inserting replaceable power supply units.
Instructions for removing and inserting fan modules.
Overview of LED indicators for system status and port activity.
Describes the function and behavior of the System Status LED.
Details the Fan Status LED, its assignments, and required actions.
Steps for upgrading MLNX-OS software using CLI or GUI.
Provides a table of common problems, symptoms, causes, and solutions.
Detailed specifications for the SN2700M series switch.
Detailed specifications for the SN2410M/SN2410bM series switches.
Detailed specifications for the SN2100M series switch.
General safety warnings and instructions for installation in English.
To Next Page
