To Next PageTo Next Page
Need help?Do you have a question about the HPE Aruba 2930F 24G and is the answer not in the manual?
General| Ports | 24 x 10/100/1000 |
|---|---|
| Power Device | Internal power supply |
| Memory | 512 MB |
| Jumbo Frame Support | Yes |
| Remote Management Protocol | SNMP 1 |
| Authentication Method | RADIUS, TACACS+ |
| Features | VLAN support, IGMP snooping, IPv6 support, Port mirroring, DHCP snooping, Dynamic ARP Inspection (DAI), Quality of Service (QoS) |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1w, IEEE 802.1s, IEEE 802.3az |
| Dimensions | 44.25 x 20.02 x 4.39 cm |
| Operating Temperature | 0 °C to 45 °C |
| MAC Address Table Size | 32, 000 entries |
| Routing Protocol | Static IPv4 routing, Static IPv6 routing |
| MTBF | 1, 000, 000 hours |
Details on how to mount the switch using a two-post rack system with provided brackets and screws.
Instructions for attaching self-adhesive pads and placing the switch on a secure horizontal surface.
Connect console cables for management and insert transceivers for network links.
Connect network cables to the switch ports for establishing network connectivity.
Guidelines for using genuine HPE Aruba SFP/SFP+ transceivers and ensuring proper operation.
How the switch obtains IP settings via DHCP or BootP upon network connection.
Procedures for safely removing and installing transceivers while the switch is powered on.
Ensuring speed and duplex settings match between switch ports and connected devices.
Information on obtaining the latest supported software version and documentation.
Details on operating temperature, humidity, and altitude limits for the switch.
Compliance standards for safety, electromagnetic compatibility (EMC), and RoHS.
