a DVD into a drive that supports only CDs.
Drive is not detected
Symptom
The USB CD-ROM or DVD drive is not detected.
Cause
The USB CD-ROM or DVD drive is not cabled properly.
The USB CD-ROM or DVD drive cables are not connected properly.
The USB CD-ROM or DVD drive cable is faulty.
The driver is not correct and needs to be updated.
Action
Be sure no loose connections exist.
Be sure cables are connected as required. For more information, see the USB CD-ROM or DVD drive
documentation or the server documentation.
Be sure the cables are working properly. Replace with known functional cables to test whether the
original cables are faulty.
Be sure the correct, current driver is installed.
4-3-10 Graphics and Video adapter issue
Troubleshooting general graphics and video adapter issue
Cause
The graphics or video adapter is not supported on the server.
Insufficient power to support the graphics or video adapter.
The graphics or video adapter is not installed or seated properly.
Action
Use only cards listed as a supported option for the server.
Be sure that the power supplies installed in the server provide adequate power to support the server
configuration. Some high-power graphics adapters require specific cabling, fans, or auxiliary power.
For more information about adapter power requirements, see the documentation that ships with the
graphics option or see the vendor website.
Be sure the adapter is seated properly.
To Next Page
Loading...
Need help?
General