EasyManua.ls Logo

HPE D3710

HPE D3710
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Item Description Status State
O Locate o
5 Health/status LED Solid green and amber o Normal operation
Green o and solid amber Fault
Green o and flashing
amber
Warning
Green o and amber o No power
Physical specifications
Height/Width/
Depth
HPE D3600/D3610 LFF: 344 x Height/Width/Depth 1764 x 2354 in (87 x 448 x 598 cm)
HPE D3700/D3710 SFF: 344 x 1764 x 2148 in (87 x 448 x 546 cm)
Weight
No disk drives: 38 lb (172 kg)
D3700/D3710 SFF fully populated with SFF disk drives: 5490 lb (249 kg)
D3600/D3610 fully populated with LFF disk drives: 60 lb (272 kg)
Power and environmental specifications
Temperature range:
Temperature ratings
shown are for sea level.
An altitude rating of 1°C
per 300 m
(18°F per
1000 ft) to 3048 m
(10000 ft) is applicable.
The upper limit might be
limited by the type and
number of options
installed.
Operating
50° to 104° F (10° to 40° C) at sea level
Shipping -22° to 149° F (-30° to 65° C)
NOTE: Rated 1°C per 1000 feet of elevation to 10000 ft.
Relative humidity:
Nonoperating maximum
humidity of 95% is based
on a temperature of 45°
C (113° F). Altitude
maximum for storage
corresponds to a
pressure minimum of 70
KPa.
Operating
10% to 90% relative humidity (Rh)
Nonoperating
0% to 95% relative humidity (Rh)
Table Continued
Reference 37

Table of Contents

Other manuals for HPE D3710

Related product manuals