• An HPE Synergy 4-Port Frame Link Module USB Adapter connected to an HPE Synergy 4-Port Frame Link module.
2.
Connect a monitor to the frame with the monitor cable.
3. Connect a USB keyboard and mouse to the USB ports on the monitor, and connect the monitor USB to the frame with the
USB cable.
Alternatively, connect the USB keyboard and mouse to a USB hub connected to the frame.
Connecting to the HPE Synergy Console using a laptop computer
WARNING: Do not plug the front panel laptop port into a switch. The front panel laptop port is designed to provide a
single laptop access to the HPE Synergy Console. Plugging the laptop port into a switch may cause issues on a network
where DHCP is running.
Troubleshooting 51
To Next Page
Loading...