3
Operation
HPM recommends you keep these instructions for
future reference.
Setting a digital timer can be confusing at first.
Essentially there are 3 steps:
1. Set the clock.
2. Setup your switching programs.
3. Put in AUTO mode and plug in your device.
The timer has 3 modes. Press the MENU button to
change from one mode to the next.
To return to clock mode from Program Setting Mode, press MENU twice.
To return to clock mode from Countdown Mode, press MENU once.
1. Clock Mode –
The screen will display
the current time and day.
2. Program Mode –
Enables you to scroll
through to view or set
the 16 program settings.
3. Countdown Mode –
Enables you to simply
set the timer to turn ON
or OFF at a later time.
MENU
UP
RCL
OK
DOWN
RESET
15:43
WE
P
1
ON
10:59
25
WE
AUTO
OFF
+1h
0:00
00
AUTO
OFF
OTD
+1h
To Next Page
Loading...
Need help?
General
