LPQ58/80 User Manual
Rev 1.0 www.hprt.com
Important Safety Instructions
1. Safety warning
Warnings: The print head will become very hot during printing; avoid contact with the print
head after printing has finished.
Warnings: Do not touch the printer head and connector in case static damage the printer
head.
2. Instructions
Read the following instructions thoroughly before starting up your printer.
1) Place the printer on a solid and even base so that it cannot fall.
2) Leave enough space around printer for operation and maintenance.
3) Keep all liquids away from the printer.
4) Do not expose the printer to high temperatures, direct sunlight or dust.
5) Protect the printer from shock, impact and vibration.
6) Ensure the printer is connected to a socket with the correct mains voltage.
7) Switch off the printer power supply when it’s not in use for a long time.
8) To ensure the printing quality and reliability, suggest use the same quality or recommend paper
9) Pls. switch off the power supply when connect/disconnect all the ports or it will cause damage
to the printer control circuit.
10) Never carry out maintenance or repair work yourself. Always contact a qualified service
11) Keep this User Manual in a place which is easily accessible at all times.
To Next Page
Loading...
Need help?
General
