HPRT SL42 User Manual

SL42 User Manual
17
3.3 Peripherals Connection
3.3.1 Interface Cable Connection
The standard for the printer’s interface cable shows in the following.
-- USB B-Type Cable
Installation steps:
1. Connect the printer to power. Refer to the "3.2 Power Connections" section for detailed
instructions.
2. Turn off the printer (O).
3. Connect the USB B-type cable to the USB port of the printer.
4. Connect the other end of the USB B-type cable to the computer.
5. Turn on the printer (—).

HPRT SL42 Specifications

General

Brand	HPRT
Model	SL42
Category	Label Maker
Language	English