HPRT SL42 - Operation Panel Overview

SL42 User Manual
22
3.5 Operation Panel
1.Feed Buttton:
◼ Turn on
In the shutdown state, turn on the power switch behind the printer, then the indicator will be
light on.
◼ Turn off
When the power switch is turned off, the printer shuts down and the indicator light is off. In the
power-on state, turn off the power switch behind the printer, then the indicator will be light off.
◼ Feed Button
1) Press the feed button, the printer sends the paper out to the specified position depending on
the type of paper used. When using continuous paper, long press the feed button to send a fixed
length of paper. if using label paper, press the feed button once that will send out a whole label.
2) When the printer is printing, press the feed button to pause the current printing and the light
is green. press the button again to print the unfinished print task.
2.Description of indicator status:
Color
Action
Indicator Status
Blue
Keep Bright
Ready
Blue
Slow flash
Dump mode
Purple
Keep Bright
Overheat of printhead
Red
Keep Bright
Head up
Red
Slow flash
Paper out
Red
Quick flash
Abnormal label calibration
Orange
Slow flash
Paper jam, Label positioning is abnormal
Green
Keep Bright
Printing
Green
Slow flash
Pause of printing