TP80 Series ● Net Configuration Tool
1. Statement
This manual content shall not be changed without permission and our company reserve the rights
to make changes in it. Please contract our company, if the user needs further information about
the products. Without any written permission from our company, any section of this manual is
prohibited to be copied or transferred in any form.
This manual describes how to install and configure Network Tools on the HOST. Please read the
following instructions carefully and follow the instructions.
This soft applies to the following operating systems:
Microsoft Windows 10 (32 bit/64 bit)
Microsoft Windows 8 (32 bit/64 bit)
Microsoft Windows 7 SPI (32 bit/64 bit)
Microsoft Windows Vista SP2 (32 bit/64 bit)
Microsoft Windows Server 2012(64 bit)
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 SP2(32 bit/64 bit)
Microsoft Windows Server 2003 R2 SP2(32 bit/64 bit)
To Next Page
Loading...
