HPRT TP801

TP801/TP805/TP806 User Manual
www.hprt.com 20
Form 1—The Choice of Baud rate
Baud rate
1-6
1-7
1-8
Default
2400
Turn on
Turn off
Turn off
9600
4800
Turn on
Turn off
Turn on
9600
Turn off
Turn on
Turn off
19200
Turn off
Turn off
Turn off
38400
Turn off
Turn on
Turn on
57600
Turn off
Turn off
Turn on
115200
Turn on
Turn on
Turn on
Form 2—The choice of print density
2-5
2-6
2-7
Printer density
Default
Turn on
Turn on
Reserve
1（diluted）
2
Turn off
Turn off
Reserve
2
Turn on
Turn off
Reserve
3
Turn off
Turn on
Reserve
4（dense）
4.7.3 The choice of auto cutter
DIP Switch setting 2
Switch2-3
Turn on
Automatic paper cutting is
prohibited
Turn off
Automatic paper cutting is
permitted
Application program
Ignore the automatic paper cutting error continuous printing
4.8 Print self testing
1) Make sure the printer has been installed paper roll and turn off the top cover;
2) Press on FEED button and turn on power switch, the printer will print out
self-test page.
4.9 Installation of Windows driver
Give an example of TP806, in printer’s CD has attached windows driver program,
open the driver program and run “DriverSetup.exe”.
4.9.1 The driver installation instruction of USB /serial port /parallel
interface
1) Double click” HPRTTPPrinterDriver-v-1.0.2.6.exe”, Choice “English” and click “OK”.