Need help?Do you have a question about the HS Tarm 2000 and is the answer not in the manual?
Overview of the boiler, manufacturer details, testing standards, and responsibilities.
Explanation of wood, oil, and gas combustion processes and user responsibility.
Requirements for boiler upkeep and addressing unsafe conditions.
Key design elements like heat exchangers, jacket, and materials.
Visual layout of boiler connections and detailed specifications.
Initial planning, safety notices, and general installation requirements.
Requirements for chimney, boiler placement, and shipment contents.
Steps for assembling the boiler, connecting gauges, and the hot water coil.
Information on control panel, wiring diagrams, and piping to the heating system.
General modes, aquastat settings for winter, and pre-operation checks.
Covers modes of operation, wood fuel, and firing procedures.
Covers regular stoking, operational procedures, and combustion process.
Guidelines for summer use, system shutdown, and heat storage tank operation.
General maintenance tasks including cleaning ash from the firebox.
Cleaning of smoke box, fan, air ducts, and checking for creosote.
Diagnosis and correction of boiler overheating problems.
Steps for operating during power loss and cooling an overheated boiler.
To Next Page
General