NOTE:
Installation must be done in accordance with all State
(Provincial) and Local Ordinances, which may differ from and take
precedence over this Owners Manual, and in accordance with the
following codes:
ANSI/NFPA No. 31 - Installation of Oil Burning Equipment;
ANSI/NFPA No. 70 - National Electric Code;
ANSI/NFPA No. 211 - Chimneys, Fireplaces, Vents,
Solid Fuel-Burning Appliances; and
ANSI/NFPA No. 54 - The National Fuel Gas Code
These documents are available from the:
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02269
Tel: 1-800-593-6372
Re-Printed October 2011
To Next Page
Loading...