8-122 Periodic Maintenance and Adjustment
Adjusting the rear brake light switch
The rear brake light switch, which is
activated by the brake pedal and rear
brake lever, is properly adjusted when the
brake light comes on just before braking
takes effect. If necessary, adjust the brake
light switch as follows.
1. Turn the adjusting nut while holding the
rear brake light switch in place. To make
the brake light come on earlier, turn the
adjusting nut in direction a. To make the
brake light come on later, turn the
adjusting nut in direction b.
1. Rear brake light switch
2. Adjusting nut
3. Install the panel.
Cable inspection and lubrication
To Next Page
Loading...